Accurate Models ® 

A new division of Custom Replicas

1/12 scale "All in One" Gemini - Phase 3: Interior patterning

Last updated: August 6, 2007

Phase 3A: Interior patterns by Terry Martin

Ejection seat 2.jpg (62989 bytes) Ejection seat 3.jpg (44395 bytes) Ejection seat 4.jpg (41708 bytes) Ejection seat 5.jpg (40653 bytes) Ejection seat 6.jpg (38678 bytes) Ejection seat 7.jpg (54402 bytes) Ejection seat 9.jpg (65706 bytes) Ejection seat 8.jpg (65819 bytes)

Ejection seat 10.jpg (57720 bytes) Control patterns 1.jpg (52518 bytes) Control patterns 2.jpg (58163 bytes) Control patterns 3.jpg (47841 bytes) Control patterns 4.jpg (44674 bytes) Ensemble patterns 1.jpg (65599 bytes) Ensemble patterns 3.jpg (52912 bytes)

Wall patterns 3.jpg (43604 bytes) Wall patterns 2.jpg (46764 bytes) Wall patterns 1.jpg (50439 bytes) Wall patterns 4.jpg (33430 bytes) Wall patterns 5.jpg (34577 bytes) water system 1.jpg (40395 bytes) water system 2.jpg (33303 bytes) water system 3.jpg (38039 bytes) water system 4.jpg (63838 bytes)

Phase 3B: Interior renderings by Jim Key

Test build 4.jpg (60290 bytes) Test build 9.jpg (101126 bytes) Test build 13.jpg (87018 bytes) Test build 14.jpg (70884 bytes) Test build 15.jpg (75001 bytes) Test build 16.jpg (55654 bytes) Test build 17.jpg (80094 bytes)

Test build 18.jpg (46721 bytes) Test build 19.jpg (56652 bytes) Test build 20.jpg (55324 bytes) Test build 21.jpg (54684 bytes) Test build 22.jpg (75851 bytes) center front console 1.jpg (42302 bytes) lower control panel.jpg (47317 bytes)

Water system test build.jpg (49143 bytes) Water system test build 2.jpg (51514 bytes) Water system test build 3.jpg (46466 bytes)

All imagery © Copyright 2006, 2008, Accurate Models & Custom Replicas